VADDIO WallVIEW Betriebsanweisung PDF herunterladen

Installation and User Guide

Camera and Electronic Products for Integrators

WallVIEW, HSDS, Quick-Connect, EZIM and PowerRite are registered trademarks of Vaddio, Inc. All other trademarks are property of their respective owners.

Document Number 341-661 Rev D.

WALLVIEW™ PRO HD1 WITH HSDS™

Vaddio™ PRO Series Cable System with

High Speed Differential Signaling for the

Sony® EVI-HD1 High Definition PTZ Camera

OVERVIEW

The Vaddio WallVIEW PRO HD1 (Figure 1) is built

around the Sony EVI-HD1 2-megapixel CMOS high

definition PTZ Camera. The WallVIEW PRO HD1 uses

high speed differential signaling (HSDS), an active

transmission system that delivers low-loss, high

definition or standard definition video over Cat. 5 cabling

distances up to 500 feet.

The WallVIEW PRO HD1 system is capable of 1080i or

720p HD resolution in a 16:9 format or standard

definition (SD) resolutions – using the optional SD

Break-out cable – in a variety of screen configurations to

fit most monitors. The HD1 camera offers both NTSC

and PAL video standards.

The WallVIEW PRO system also has many new features, including a unique IR forwarding system which

allows the user to forward IR commands from third party IR remote controls, through the WallVIEW system to

a third party device such as a videoconference codec (see Figure 2). Other new features include video

outputs on BNC connectors (Y,Pb, Pr or Y-C and composite), a four position distance adjustment for Cat. 5

cabling, Y-Gain adjustment, and the EZ Interface Module (EZIM). Like all Vaddio WallVIEW systems, the

Thin Profile Wall Mount and mounting hardware is included.

INTENDED USE

Before installing the Vaddio WallVIEW PRO HD1 Camera System, please read the entire manual thoroughly.

All Vaddio camera systems are designed for use indoors. Outdoor operation is not recommended, has not

been tested, and could damage the camera and/or create a potentially unsafe operating condition. Use only

the Vaddio PowerRite power supply provided.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you install the Vaddio WallVIEW PRO system. For

reference, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product

drawings for the Vaddio product line on the website. These documents can be downloaded from

www.vaddio.com

free of charge.

IMPORTANT SAFEGUARDS

Read and understand all instructions before using. Do not operate the any electrical device if it has been

dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To

reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid

conditions.

INFORMATION

For RS-232 control information, please see the full-length Technical Manual for the SONY EVI-HD1 model.

This manual can be found either on the Vaddio or Sony website. Vaddio has also prepared a number of

TechNotes, specifications and drawings designed to inform and educate integrators’ of the value and the

specific uses of Vaddio products.

Figure 1:

WallVIEW PRO HD1 System with Camera,

Wall Mount and EZIM

Use only the power supply provided with the Vaddio WallVIEW products.

Use of an

unauthorized

ower su

will void an

and all warranties.

1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - WALLVIEW™ PRO HD1 WITH HSDS™

Seite 2 - Adapter Cable

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 10 of 14 Appendix 1: Cable Pin-outs for the WallVI

Seite 3

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 11 of 14 300200POWER36V 2A >100400+Y-GAINCAM SE

Seite 4

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 12 of 14 FCC, ICES-003 Compliance and CE Declarati

Seite 5

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 13 of 14 WARRANTY INFORMATION Hardware* Warranty -

Seite 6

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 14 of 14

Seite 7

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 2 of 14 UNPACKING: Carefully remove all of the par

Seite 8

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 3 of 14 Polycom Breakout CablePolycom HDX-8000 Ser

Seite 9

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 4 of 14 Wiring Diagram Example* for Interfacing wi

Seite 10 - 12345678

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 5 of 14 MOUNTING INSTRUCTIONS Step 1: After determ

Seite 11 - CAM SELECT

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 6 of 14 Step 4: Place the wall mount, without the

Seite 12

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 7 of 14 Step 9: For HDX 9000 Series Installs Requ

Seite 13

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 8 of 14 COMPLETING THE INSTALLATION: Connect the V

Seite 14

WallVIEW PRO HD1 Installation and User Guide 341-661 Rev. D Page 9 of 14 GENERAL SPECIFICATIONS WallVIEW HD1 System

Weitere Dokumente für Sicherheitszugriffskontrollsysteme VADDIO WallVIEW

Um das Dokument anzuzeigen VADDIO WallVIEW Betriebsanweisung

VADDIO WallVIEW Betriebsanweisung (20 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

VADDIO WallVIEW Betriebsanweisung

Stöbern Sie online oder laden Sie Betriebsanweisung nach Sicherheitszugriffskontrollsysteme VADDIO WallVIEW herunter. VADDIO WallVIEW User guide Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Sicherheitszugriffskontrollsysteme VADDIO WallVIEW

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme VADDIO WallVIEW