Vaddio CeilingVIEW 70 Manual Bedienungsanleitung PDF herunterladen (Seite 7)

CeilingVIEW 70 PTZ - Document 010-2304-000 Rev.E

Page 7 of 14

Vaddio supplies this control specification for the CeilingVIEW 70 PTZ camera.

This VISCA control set (as used in Sony EVI cameras) is used in conjunction with

additional Vaddio control commands (see comment section on Table 1) for added

functionality of the camera lift.

Communication Speed: 9600 bps (default)

Start bit: 1

Stop bit: 1

Data bits: 8

Parity: None

The control codes for the CeilingVIEW 70 PTZ are the same codes used with the

EVI-D70 pan/tilt/zoom camera. Vaddio is not translating these codes and does

not add any translation or memory capability to enable use of the EVI-D70 camera

as a main or auxiliary camera with videoconferencing system codecs or the

associated IR remote controllers of the codecs.

For best control results, use the provided RM-EV100 IR Remote Controller or the

VISCA Commands (detailed in Table 1 below) with an external control system.

Table 1: VISCA Command List (Partial)

RS-232

Command Set

Command Command Packet* Comments

AddressSet Broadcast 88 30 01 FF Address setting

IF_Clear Broadcast 88 01 00 01 FF I/F Clear

CommandCancel 8x 2p FF p: Socket No.(=1or2)

On 8x 01 04 00 02 FF Power ON

CAM_Power

Off (Standby) 8x 01 04 00 03 FF Power OFF

Stop 8x 01 04 07 00 FF

Tele(Standard) 8x 01 04 07 02 FF No

Wide(Standard) 8x 01 04 07 03 FF

Tele(Variable) 8x 01 04 07 2p FF

p=0（Low）～7（Fast）

Wide(Variable) 8x 01 04 07 3p FF

CAM_Zoom

Direct 8x 01 04 47 0p 0q 0r 0s FF pqrs: Zoom Position

D-Zoom On 8x 01 04 06 02 FF Digital Zoom ON/OFF

CAM_Dzoom

D-Zoom Off 8x 01 04 06 03 FF

Stop 8x 01 04 08 00 FF

Far(Standard) 8x 01 04 08 02 FF

Near(Standard) 8x 01 04 08 03 FF

Far(Variable) 8x 01 04 08 2p FF

p=0（Low）～7（High）

Near(Variable) 8x 01 04 08 3p FF

Direct 8x 01 04 48 0p 0q 0r 0s FF pqrs: Focus Position

Auto Focus 8x 01 04 38 02 FF AF ON/OFF

Manual Focus 8x 01 04 38 03 FF

CAM_Focus

Auto/Manual 8x 01 04 38 10 FF

RS-232

MMAND LI

Communication

Specification

*Communication Example:

For the VISCA Packet “8x 01 04 07 03 FF”

(CAM_Zoom_Wide), “x” corresponds with

the number and order of the camera in the

control chain (daisy chain) where x = 1 for

the first camera, x = 2 for the second

camera, etc…

Control

Disclaimer

Command List

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Vaddio CeilingVIEW 70 Manual Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Vaddio CeilingVIEW 70 Manual