VADDIO PRODUCTIONView HD-SDI MV Betriebsanweisung PDF herunterladen (Seite 10)

ProductionVIEW HD MV

ProductionVIEW HD MV Manual - Document Number 342-0241 Rev G Page 10 of 36

First Time Set-up with the ProductionVIEW HD MV:

ProductionVIEW HD MV is designed to be exceptionally easy to use and operate right out of the box. All of the

Vaddio standards for using video, power and control over Cat. 5 cabling are well documented and are in the

manual and available free of charge from the Vaddio website.

Getting Started:

Connect all of the cameras, monitors and peripheral devices to ProductionVIEW HD MV. The back panel has

five-standard DE-15-F (HD-15) connectors and one-DVI-I connector. Vaddio offers several different break out

cables including one for SD video inputs (either Y/C or composite) and two cables (3 ft. or 6 ft.) for high resolution

video (YPbPr or RGBHV). See accessory cables below.

Once you have connected all of your inputs, outputs and the PowerRite power supply, plug the AC cord into an

outlet. ProductionVIEW HD MV will boot up and scan for cameras. As ProductionVIEW HD MV boots up, it will

automatically scan each input to confirm which ports have compatible PTZ cameras connected. After boot up, a

menu will appear on the blue LCD screen.

Configuring Output Resolutions:

On the LCD screen, a chevron (>) will be

displayed next to the menu item that is currently

selected. Press the arrow down button (↓)

adjacent to the LCD screen, until the chevron is

next to “VIDEO OUTPUT MENU” and then press

the SELECT Button. Select PROGRAM OUTPUT,

which will display your options for video output

resolution for the PROGRAM OUTPUT.

Press the arrow down button to the appropriate resolution that is compatible with your video monitor and press the

SELECT Button. Press the CANCEL Button to exit out to the previous menu.

Repeat the process for your Preview Output. Once you have selected the Program and Preview output

resolutions, press the CANCEL Button to get back to the Main Menu. For additional information on the menu

structure, see pages 20 to 24 for additional information.

To set up the Preview out to be a multiviewer output, go to menu item “MULTIVIEWER” and select “ON”. If you

are using the optional Vaddio TeleTouch touch screen controller, go to “System Menu” and go to menu item

“TOUCH SCREEN”. Select either the 22” or the 18.5” monitor, which sets the correct touch screen coordinates.

Use 1080p/60 Hz or 1080p/50 Hz output resolution for the multiviewer and TeleTouch Monitor.

Auto Configured Input Resolutions:

 The ProductionVIEW HD MV automatically configures and matches the input resolution for each camera

video output connected (with active video output) to an Input Port.

 For Inputs 1 through 5, it will scan and select from 1080p/60 Hz (1920x1080) to 640x480@60 Hz. (including

SD 480i/29.97 NTSC and PAL 576i/25 Composite and S-Video).

 Input 6 (DVI-I Port) will scan and select from 1080p/60 to 640x480@60 Hz.

Additional Programming: Review the ProductionVIEW HD Menu Structure for additional information on

programming specific parameters. For API and Programming Language, see information in the Appendix.

Vaddio Accessory Cables and Part Numbers:

440-5600-000 – 15-pin to SD (Y-C / CVBS) breakout cable (female BNCs - 1’ / 308.4mm)

440-5600-001 – 15-pin to HD Component (YPbPr/RGBHV) breakout cable (male BNCs - 3’ / .914m)

440-5600-002 – 15-pin to HD Component (YPbPr/RGBHV) breakout cable (male BNCs - 6’ / 1.83m)

440-5600-003 – 15-pin to HD Component (YPbPr/RGBHV) breakout cable (female BNCs - 7” / 177.8mm)

440-5600-000: Optional SD Accessory

Cable (Y-C & Composite) Required for

SD signals into ProductionVIEW HD MV

Optional HD Accessory Cable

(3’ or 6’ length)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

VADDIO PRODUCTIONView HD-SDI MV Betriebsanweisung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme VADDIO PRODUCTIONView HD-SDI MV